1 Kings 7:35

31 The opening to each stand inside the crown at the top was one cubit deep, with a round opening like the design of a pedestal, a cubit and a half wide. And around its opening were engravings, but the panels of the stands were square, not round.

32 There were four wheels under the panels, and the axles of the wheels were attached to the stand; each wheel was a cubit and a half in diameter.

33 The wheels were made like chariot wheels; their axles, rims, spokes, and hubs were all of cast metal.

34 Each stand had four handles, one for each corner, projecting from the stand.

35 At the top of each stand was a circular band half a cubit high. The supports and panels were cast as a unit with the top of the stand.

36 He engraved cherubim, lions, and palm trees on the surfaces of the supports and panels, wherever each had space, with wreaths all around.

37 In this way he made the ten stands, each with the same casting, dimensions, and shape.

38 He also made ten bronze basins, each holding forty baths and measuring four cubits across, one basin for each of the ten stands.

39 He set five stands on the south side of the temple and five on the north, and he put the Sea on the south side, at the southeast corner of the temple.

Read all of 1 Kings 7